Network Setup - Vision TC-WIRELESS Product Manual

PRODUCT MANUAL TC-WIRELESS
EN
1 INCLUDED
Receiver Transmitter 2 x HDMI Cables
300 mm + 1 m
1 ft + 3.3 ft
2 RECEIVER (RX) SETUP
1. Connect Rx as shown.
Optional 50 x 50 (M4) holes on underside for mounting.
2. Press power button

3 NETWORK SETUP

The RX creates local 5 GHz wifi network which allows access to setup pages. Bypass these steps if you plan only to use the dongle.
These steps are necessary to activate Airplay, Android screen sharing, and access settings:
1. Connect laptop or mobile to WIFI SSID: TECHCONNECT Default password 00000000
2. On Laptop browser enter direct IP 192.168.168.1
2
5V 2A Power adapter
3. Select Network Management. Connect Rx to a 5 GHz WIFI network. This product does not work with 2.4 GHz.
If you cannot see a network
Enter admin password default 000000 and select Wi-Fi Channel. Ensure country is correct.
a.
b. Change channel on your router. These are acceptable channels:
i. Try first U-NII 1 36, 40, 44, 48
Try second U-NII 3 149, 153, 157, 161, 165
ii.
This product does not support DFS therefore U-NII 2 channels are not supported.
3