Programming The Adjustable Rapid/Burst Fire Settings; Rapid Fire Speed Settings Table; Important Rapid Fire Speed Information; Enter The Programming Mode - MODZ Razorback Maxfire PS4 Manual

Programming the Adjustable Rapid/Burst Fire Settings

Each rapid fire mode can be programmed to one of 50 different speed between 4 and 50
shots per second. You can also set the burst fire for each mode from 2 – 10 shots per burst.

Enter the Programming Mode:

To enter the programming mode you must first HOLD "R1" + "R2" + "L1" + "L2" all at the
same time for 5 seconds. You will see the main LED flash White for 2 seconds.
Exit Programming Mode:
To exit the programming mode just TAP the "TOUCHPAD".
TAP
Change Rapid Fire Speed:
To change the rapid fire speed you only need to TAP "UP" or "DOWN" on the D-pad. "UP" to
make the speed faster and "DOWN" to make it slower. The main LED will flash GREEN when
increasing the speed and RED when decreasing. Once you have reached the MIN or MAX
speed the LED will no longer flash.
Change Burst Fire Quantity:
To change the number of shots fired with the burst fire you must TAP "LEFT" or "RIGHT" on
the D-pad. Left for fewer shots and Right for More shots.
Check Rapid Fire Speed Setting:
To check the currently set rapid fire speed you only need to TAP "TRIANGLE". The main LED
will flash BLUE for the "tens" position and then flash GREEN for the single digit. (example:
BLUE flashes 3 times, followed by GREEN flashing 6 times, you are now at speed setting 36)
Refer to the table on the next page for all of the speed setting options.
TAP
Check Burst Fire Setting:
To check the currently set burst fire setting just TAP "X". The main LED will flash BLUE 2-10
times to indicate the number of shots set for the burst fire.
Reset Current Mode to Default Settings:
To reset the rapid fire mode you are currently editing to the factory default you must HOLD
"SQUARE" and "CIRCLE" together for 7 seconds. After 7 seconds the main LED will flash
AQUA very fast 20 times to indicate the Mode has ben reset.
+
MASTER RESET:
Resets ALL modes, speeds and sub modes to their default settings. HOLD "BOTH
THUMBSTICK CLICKS" for 7 seconds. The main LED will flash RED , GREEN, BLUE , RED, after
this all settings will be set to default and the programming mode will be exited.
Pg. 7
HOLD
HOLD HOLD HOLD
+ + +
TAP
TAP
or
TAP
TAP
or
TAP
+
(7 sec)
(7 sec)
Rapid Fire Setting
1
2
(5 sec)
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

Important Rapid Fire Speed Information!

The PS4 Razorback - Modchip allows you to set rapid fire speeds up to 50
shots per second, but you must be aware that setting the rapid fire to the
maximum will NOT work for most games. All games have limitations on the rates at
which weapons can fire. Our default mode settings are already optimized to the
fastest possible speeds for the games/weapons listed on page 3.
The possibility to change these settings are available for you to experiment with
and find settings that best compliment your playing style and to be able to create
modes for current and future games which are not part of the default setup.
If you have questions regarding rapid fire or any feature please

Rapid Fire speed settings table

Shots Per Second Rapid Fire Setting
26
50
27
45
28
40
29
36
30
33.33
31
30
32
28
33
26.67
34
25
23 35
36
22
21 37
38
20
39
19
40
18.2
41
17.4
42
16.67
43
16
44
15.4
45
14.8
46
14.3
47
13.8
48
13.33
49
12.9
50
12.5
contact us at Sales@controllermodz.co.uk
Shots Per Second
12
11.75
11.5
11.1
10.8
10.5
10.25
10.00
9.75
9.5
9.3
9
8.7
8.5
8.33
8.00
7.7
7.5
7.3
7
6.67
6
5.5
5
4
Pg. 8