Quick Scope; Auto Run; Auto Aim; Battlefield Auto Spotting - MODZ Razorback Maxfire PS4 Manual

HOLD
+

Quick Scope

To activate/deactivate HOLD the "TOUCHPAD" and TAP "L2". With quick scope
active just hold the left trigger and you will scope and automatically fire at the
speed set in the edit mode. Edit Mode is accessed the same was as sub modes. The
LED will Flash Orange 10 times when entering/exiting the edit mode.
Hold Only L2 – Test the currently set speed.
Tap UP on D-pad – Makes shot happen earlier (LED flashes Green)
Tap DOWN on D-pad – Makes shot happen later (LED flashes Red)
Tap RIGHT on D-pad – Turn Rapid fire with quick scope ON/OFF
Hold LEFT on D-pad, Then Hold L2 – Set new Quick Scope speed.
Recording starts when you press L2 and stops when you either
release it or press R2.
Tap the Touchpad – Exit Edit Mode.
+
HOLD

Auto Run

To activate/deactivate auto run HOLD the "TOUCHPAD" and CLICK "L3". With auto
run active you do not have to click L3 to start running, it is done automatically.
Sub Mode 1 = Always runs
Sub Mode 2 = Run suspended when prone/crouch with "CIRCLE"
Sub Mode 3 = Run suspended when prone/crouch with "R3"
HOLD
+

Auto Aim

The auto aim feature ONLY WORKS WITH Offline ZOMBIES & CAMPAIGN GAMES
AND DOES NOT WORK WITH ONLINE MATCHMAKING. To activate/deactivate auto
aim HOLD the "TOUCHPAD" and TAP the "X" button. With auto aim active, when
you press the left trigger, you will automatically lock on and track the closest target.
Pg. 5
TAP

Battlefield Auto Spotting

To activate/deactivate HOLD "R1" and TAP "LEFT" on the D-pad. With auto spotting
active the controller will automatically press "R1" (Or "R2" if trigger configuration is
set to flipped). When you are aiming at an opponent they will be automatically
marked with an indicator above their head for you and your team to see, giving your
team a significant advantage.
Sub Mode 1 = BF4 On only when Aiming down sights
Sub Mode 1 = BF4 On all the time
Turn Off All Features
To Quickly turn off all controller features that may be turned on you can HOLD "R3"
+ "L3" and then TAP either "left" or the "TOUCHPAD". The RED LED will quickly flash
10 times and all features will be turned off.
Domin8or Remapping Buttons
Domin8or buttons are additional buttons which can be added to and placed on the back
of your controller at the time of purchase. Reflex buttons can replicate any of these
standard controller buttons: Circle, Square, Triangle, X, R1, R2, R3, L1, L2, L3, Up,
Down, Left, Right, Touchpad click.
These Buttons are set by default to replicate Circle or X. However they can be
changed to any of the above mentioned buttons within the controllers programming
mode. See page 7 for information on accessing the programming mode. Once in the
programming mode just HOLD one of the Domin8or buttons and TAP the button you
want to assign to it. The main LED will flash GREEN 3 times to confirm your change.
If you tap the controller button which is already assigned to the domin8or button, this
will disable the button and the main LED will flash RED 3 times. The button will then
not do anything when pressed until it is reassigned to a new controller button.

Competition Mode

Domin8or buttons are legal for most competitions, because of this the PS4 Razorback
Maxfire also has a competition mode (see Advanced Feature Management on page 9)
which can be enabled to make your controller competition legal. This option quickly
disables all Mods and LED notifications and leaves only the reflex buttons active.
+
HOLD
TAP
+ +
or
(Optional feature)
Pg. 6