Summary of Contents for Berker Radio Touch 2880 Series
Page 1
Radio Touch Radio Touch Order no.: 2880 xx Operation and installation instructions 1 Safety instructions Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the relevant installation standards, regulations, directives and safety and accident prevention directives of the country. Failure to comply with these instructions may result in damage to the device, fire, or other hazards.
Radio Touch 3 Function The radio receives FM radio stations and outputs them via the connected loudspeaker. Additional functions: Capacitive touch display – Manual and automatic station search – 8 memory slots – Display of reception frequency and RDS information –...
Page 3
Radio Touch The six symbolic operating elements, arranged at the top and bottom of the display, represent fixed buttons for frequent operations. Figure 3 Either a 3- or 5-line menu (Figure 3) or up to 9 fields for the settings (Figure 2) are shown on the display.
Page 4
Radio Touch Figure 4 Using the control panel, apply the number of another setting, e.g. min or sec or save the settings with (Figure 4). Adjust other settings accordingly. The order and number of settings is arbitrary. The active setting is displayed in square brackets. Setting the volume The radio is switched on.
Page 5
Radio Touch Setting an FM station with automatic search The radio is switched on. Touch the button until main menu appears (Figure 3). Select the control panel FM Radio using and press it. Select the Automatic Scan control panel with and press it.
Page 6
Radio Touch Setting the alarm The radio is switched on. Touch the button until main menu appears (Figure 3). Select the Timer control panel with the buttons and press it. Select Wake Up with and press it. Select On with and press it.
Page 7
Radio Touch 5 Information for electricians 5.1 Installation and electrical connection DANGER! Touching live parts can result in an electric shock. An electric shock can lead to death. Before working on the device or load, disconnect all associated circuit breakers. Cover all live parts in the area! Connections on the radio insert (Figures 5 and 6) for: (13) Loudspeaker (L, R)
Page 8
Radio Touch (17) 230 V~ lead (18) Extension unit Connecting radio to lead The lead is protected by means of a circuit breaker (max 16 A). Connect the 230 V~ lead to the L and N terminals (Figure 6, 17). If necessary, connect the extension unit (Figure 6, 18).
Page 10
Radio Touch If necessary, connect other external devices (Figures 7, 8 or 9). In stereo mode with two loudspeakers, the control panel with the station display can be used to switch manually to mono operation. Only use wires that are adjusted for the mains voltage method of laying. Wires must be mounted in such a way, e.g.
The local authorities provide information about environmentally-friendly disposal. When used as intended, this device complies with the requirements of the R&TTE Directive (1999/5/EC). A complete declaration of conformity can be found on the Internet at www.berker.com. 6.1 Technical Data Radio Touch Operating voltage...
Our products are under guarantee within the scope of the statutory regulations. If you have a warranty claim, please contact the point of sale or ship the device postage free with a description of the appropriate regional representative. Berker GmbH & Co. KG Klagebach 38 58579 Schalksmühle/Germany...
Need help?
Do you have a question about the Radio Touch 2880 Series and is the answer not in the manual?
Questions and answers