Important Safety Information; General Safety Warnings - Xtreme Power 75131 Owner's Manual And Safety Instructions

IMPORTANT SAFETY INFORMATION

GENERAL SAFETY WARNINGS

SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PUMP AND SAND FILTER IS NOT
INSTALLED AND USED CORRECTLY. INSTALLERS, POOL OPERATORS AND POOL OWNERS
MUST READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING THIS PUMP AND
SAND FILTER.
SAFETY
Most states and local codes regulate the construction, installation, and operation of public pools and
spas, and the construction of residential pools and spas. It is important to comply with these codes,
many of which directly regulate the installation and use of this product. Consult your local building
and health codes for more information.
IMPORTANT: Attention Installer: This Installation and User's Guide contains important
information about the installation, operation and safe use of this pump and sand filter. This
Guide should be given to the owner and/or operator of this equipment.
The sand filters are designed to work with water temperature > 0° C and < than 45 0° C.
The filter should never be operated outside of these temperatures or damage may occur. The
installation should be carried out in accordance to the safety instructions of swimming pools and
the specific instructions for each facility.
A pool or spa pump must be installed by a qualified pool and spa service professional in
accordance with the National Electrical Code and all applicable local codes and ordinances.
Improper installation may create an electrical hazard which could result in death or serious
injury to pool users, installers, or others due to electrical shock, and may also cause damage to
property
To reduce the risk of injury, do not permit children to use or operate this pump and sand filter.
DO NOT store chemicals around your pool. Chemical spills and fumes can weaken swimming
pools and/or spas.
Any modifications of this equipment of the filter requires prior consent from the supplier's
original replacement and accessories authorized by the manufacturer to ensure a high level
of safety. The supplier assumes no liability for any damage or injuries caused by unauthorized
replacement parts and/or accessories. In the even of defective operation or fault, contact the
supplier or the nearest authorized service agent.
When setting up pool water turnovers or flow rates the operator must consider local codes
governing turnover as well as disinfectant feed ratios
DO NOT increase pump size; this may increase the flow rate through the system and exceed
the maximum flow rate stated on the drain cover.
Pumps improperly sized or installed or used in applications other than for which the pump was
intended can result in serious personal injury or death. These risks may include but not be
limited to electric shock, fire, flooding, suction entrapment or serious injury or property damage
caused by a structural failure of the pump or other system component
1