Page 1
Operator’s manual for Attachment manual for Attachment Operator’s Operator’s manual for Attachment manual for Attachment Product number: 300-700-series loaders: A21047 A21039 200-series loaders: A33029 Foldable load backrest extension: A21512 Please read this manual carefully before using the equipment, and follow all instructions.
Pallet Forks 2012 1 CONTENTS 1. Foreword..........................3 2. Designed purpose of use ......................3 3. Safety instructions for the pallet forks ..................3 4. Pallet fork specifications......................5 5. Putting the pallet forks into use ....................6 5.1. Assembling the pallet forks ......................5.2. Attaching the pallet forks to the loader..................... 6.
3(12) 1. Foreword Avant Tecno Oy would like to thank you for your purchase of this AVANT attachment. It has been designed and manufactured on the basis of years of product development and experience. By familiarising yourself with this manual and following the instructions, you ascertain your safety and ensure the reliable operation and long service life of the equipment.
Page 4
4(12) • When attaching the pallet forks to the loader, ensure that the locking pins of the loader's quick attach plate are in the lower position and that they have locked the attachment to the loader. • Always transport the load as low as possible to keep the centre of gravity low. Heaviest end of the load should be closest to the machine.
Do not go under a raised attachment or the loader boom, keep a safe distance to lifted equipment. A412616 Safe working load, A33029 (see page 9) A412617 Safe working load, A21047 (see page 9) A414211 Safe working load, A21039 (see page 9) Decal locations...
6(12) 5. Putting the pallet forks into use As the pallet forks are delivered, for easier transportation the frame and the forks may be separated. The pallet forks can be easily assembled; tools are required only to tighten the bolts which lock the backrest extension and the forks on the frame.
7(12) 5.2. Attaching the pallet forks to the loader Mounting the attachment to the loader is quick and easy, but it must be done carefully. An attachment that has not been locked may come off the loader and cause hazardous situations. In the worst case, the attachment may slide onto the driver along a raised boom.
8(12) Before moving or raising the attachment, ensure that the locking pins are in the lower position and come through the fasteners both sides. Unlocked attachment may fall on the boom or operator and cause injuries. 6. Using the pallet forks Check the attachment and the operating environment once more before starting to work.
Actual lifting capacity could be significantly higher, or it may be lower, depending on terrain conditions and load distribution. Table 3 – Safe Working loads as determined by ISO 14397-1 Pallet fork model: A33029 A21047 A21039 Avant model: 216/218/220 330 kg...
300-700 –series). The adapter is fitted in between the pallet forks and the loader coupling plate. The adapter allows the load to be tilted ±12.5 degrees sideways. Read the instructions provided with the tilt adapter. More information about the tilt adapter is available from your AVANT retailer or the AVANT web pages at www.avanttecno.com.
11(12) 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) for attachment from the date of purchase. The warranty covers repair costs as follows: • Work costs are covered, if the repair is not performed at the factory.
Need help?
Do you have a question about the A21047 and is the answer not in the manual?
Questions and answers