Table of Contents
Advertisement
Completing the Software Installation
1 1 1 1
From the desktop, select Start | Programs | Zoom USB
DSL | Control Panel and click the Protocol Setup tab.
2 2 2 2
If you selected Custom PPPoA or PPPoE in Step 1 on
page 15:
You'll see a dialog box with choices like those below.
Select the Encapsulation Mode.
Enter the VPI and VCI numbers.
Note: Your provider should have supplied you with this
information. If not, you will need to request it. You
may also refer to the tables on page 5 and 16.
Click Apply and then OK.
20
Zoom ADSL Modem User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSL Modem and is the answer not in the manual?
Questions and answers