Bosch PSU 5000 Series Instructions For Assembly And Operation Manual page 61

Controlling
the inverter
8--4
PSU 5000 / PSG 3000
Instructions for Assembly and Operation
Weld time, green LED
Max. pulse width
(signalled by decimal point)
Change- -over of control mode by setting switch 8
of DIP switch bank S1 to ON position
(cf. Section 9.5)
X12:
Pin 5: + analog command value 1 V to 10 V
Pin 6: - - analog command value
X22:
Pin 1: weld time +24 V, 20 mA
Pin 2: weld time 0 V
1070 078 224--- 108