Index - Bosch PSU 5000 Series Instructions For Assembly And Operation Manual

17 Index

Numbers
24 V weld time signal, 8--3
5 kHz firing pulses, 8--1
A
Accessories, 14--1
Activation of the inverter, 12--1
Adjustment of PSU 5200 to PSG, 9--3
Adjustment to timers with/without SSU function, 9--4
Adjustment, control mode, 9--3
Adjustment, PSU to the welding transformer, 9--2
Advantages of medium--frequency welding, 1--1
Analog input voltage (controlling), 8--3
Assembly, 10--10
B
Block diagram of an inverter system, 3--2
C
CE conformity, I -- 10
CE label, I -- 5
Change--over of current range, 9--2
Change--over of operating modes, 6--4
Circulating currents, 11--11
Compatibility with residual--current devices, I -- 4,
11--1
Connecting cable, 14--1
Connecting PSU to timer, 11--8, 11--10
Connection between PSU and PSG, 11--10
Connection between PSU and timer, 11--8
Connection of a PSS 2000 to the inverters, 11--4
Connection of X1 interface, 11--4
Connection of X11 interface, 11--5
Connection of X12 interface, 11--5
Connection of X21 interface, 11--6
Connection of X22 interface, 11--6
1070 078 224- -109
PSU 5000 / PSG 3000
Instructions for Assembly and Operation
Connection overview, PSU, 11--2
Connections for cooling water, 10--8
Connections PSU (Overview), 11--3
Connectors, accessories, 14--1
Contact voltage, 11--11
Controlling
by 5 kHz firing pulses, 8--1
by an analog input voltage and 24VDC weld time
signal, 8--3
Cooling water connections, 10--8
Crossover currents, 11--11
Current control function, 6--1
Current--operated e.l.c.b. system, 11--15
D
Data, technical, 5--1
Deactivation of the inverter, 12--1
Diagrams, Secondary welding current depending on
SKT, 6--1
Dimensions of PSG, 10--4
Dimensions of PSU, 10--1
Diode change--over, 9--3
Direct protective conductor connection, 11--11,
11--15
Display, Max. pulse width reached, 7--2, 8--2, 8--3
Driving the inverter, 2--2
E
EC Declaration of conformity, 16--1
Electrical connection, 11--1
EMC, I -- 5
EMERGENCY--OFF facilities, I -- 9, 13--1
Encoding of fault messages, 7--5
Explanation of pictographs, I -- 1
Explanation of symbols, I -- 1
F
Fault message codes, 7--5
Fault number, Explanation and remedy, 7--3
Functional description, 3--1
G
Ground connection, 11--13
Index
17--1