La Crosse Technology EH-23SA E Howard Quick Start Manual

Atomic watch

Download this manual

The NIST (National Institute of Standards and Technology-Time and Frequency Division) WWVB radio

station is located in Ft. Collins, Colorado, and transmits the exact time signal continuously at 60 kHz.

For information about WWVB visit:

Normally upon purchase, the watch will be set to Pacific Time. You may select your time zone manually to

time zones around the world.

1. Hold the RECESSED BUTTON for about 3-4 seconds. The current hour is shown at the right of

the display. The left side displays the current time zone selection.

Abbreviation

-4

2. Press and release the PUSH-PIECE to reach your desired time zone.

3. Once you have selected your correct time zone, to exit this setting press and release the

RECESSED BUTTON or wait about 15 seconds without pressing any buttons and the watch will

automatically return to its normal display setting.

E HOWARD ATOMIC WATCH

Atomic Analog Watch

bit.ly/AtomicTime

Recessed

Button

Change Time Zone

Time Zone

Hawaiian

Alaskan

Pacific

Mountain

Central

Eastern

Atlantic

Watch

Digital LCD

Analogue display

Push-piece

Button

This image shows

9:00am Central Time.

Page 1 E HOWARD ATOMIC WATCH Atomic Analog Watch The NIST (National Institute of Standards and Technology-Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time signal continuously at 60 kHz. For information about WWVB visit: bit.ly/AtomicTime Watch Analogue display...
Page 2 E HOWARD ATOMIC WATCH Select Digital Display Press and release the PUSH-PIECE to toggle between the displays: • Month and Day: ay (ex: 5.29) The Date appears as Month and D • Or Seconds and WWVB Signal Reception Icon Set Time and Date IMPORTANT: If the WWVB signal is received correctly, the symbol (tower) is shown, and setting the time and date manually is not possible.
Page 3 E HOWARD ATOMIC WATCH Manual Search for Atomic Time Signal 1. Hold the PUSH-PIECE for about 4 seconds. The hands will advance to the 12:00 position. “SET” and “12” will then flash alternately in the LCD. 2. Place the watch on a steady surface for better reception. Prior to WWVB reception (and 15 seconds after holding the PUSH-PIECE) the hands will automatically return to the manually set time.
Page 4 E HOWARD ATOMIC WATCH Warranty Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. If you require additional support, get in touch with our friendly customer support team based out of La Crosse, WI.