Table of Contents
Advertisement
If there is no rinse aid warning light in the control panel, you can judge the amount of rinse aid by the following means.
The black dot on the rinse aid dispenser indicates the amount of rinse aid in the dispenser. As the rinse aid diminishes,
the size of the black dot decreases. You should never let the rinse aid get below 1 / 4 full.
The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and
saucers, as well as plates, small bowls and shallow pans(as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.
The upper rack can be adjusted for height by putting wheels of different height into the rails.
4
We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,
serving dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the
top spray arm.
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom rack feature fold down tine rows so that larger or more pots and pans can be loaded.
4
Indicator
As the rinse aid diminishes, the size of the black dot on the rinse
aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
1
Cups
2
Serving bowl
3
Fruit bowl
4
Glasses
6
D inn er pl ates
7
Brea d and butter plates
8
Saucer
9
Serv ing plate
10
Silverware basket
6
Advertisement
Table of Contents
