Amazon B07PDGZ8X7 Manual page 28

Problem
No dialling tone
when pressing
the <TALK ON>
key
When connected
to a PBX, no
and/or wrong
connection after
dialling
OUT OF RANGE
is displayed
The call does not
work.
No display.
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the
impact of electrical and electronic goods on the environment, by increasing re-use
and recycling and by reducing the amount of WEEE going to landfill. The symbol on
this product or its packaging signifies that this product must be disposed separately
from ordinary household wastes at its end of life. Be aware that it is your responsibility
to dispose of electronic equipment at recycling centres in order to conserve natural
resources. Each country should have its collection centres for electrical and electronic
equipment recycling. For information about your recycling drop-off area, please contact
your related electrical and electronic equipment waste management authority, your local
city office, or your household waste disposal service.
28
Causes
• The connection cord of the
base station is not plugged in.
• The adaptor cord is not
plugged in correctly in the
base station.
• Another handset is using the
base to make a call.
• Wrong telephone line cord
• Dialling prefix is needed.
• Base station out of range.
• Base station not connected
to mains.
• Service not activated or wrong
operator or wrong setting.
• Empty battery
Solutions
• Check the connections. Unplug and
plug back in the mains. Check that
the telephone cord has been plugged
into the base station and the phone
socket.
• Check the base station plug and the
230 V plug (remove and plug in).
• Wait until the line is unoccupied.
• Use the original telephone line cord
supplied.
• Insert the dialling prefix.
• Reduce the range.
• Connect the base station to mains.
• Check your subscription with network.
• Recharge battery.