Advertisement
Quick Links
Advertisement
Related Manuals for Louisville Ladder PUMP JACK
Summary of Contents for Louisville Ladder PUMP JACK
- Page 1 l o u i s v i l l e l a d d e r P U M P J A C K G U I D E BECAUSE WORK AIN’T PLAY.
- Page 2 At Louisville Ladder, safety is a top concern. In this guide, you will find a brief outline to inspect, setup, and properly use your Pump Jack System. You should always read the safety manual, instruction labels, and safety labels before working with this product.
- Page 3 Pump Jack System. debris. Make sure there are no overhead system. Make sure they are in good working...
- Page 4 For soft the pole. bench and pump jack and secure with the bolt ground either a pole anchor or a pole foot and nut provided. with a wood sill plate is required.
- Page 5 INSPECTING AND SETTING UP YOUR PUMP JACK Finally, Place Install the platform stage on the pump the guardrails at each end of the to complete the set-up, install the safety net between the work bench and jack. To secure the stage, run the chain stage.
- Page 6 USING YOUR PUMP JACK RAISING AND LOWERING YOUR SYSTEM First, Then working alone, alternate between make sure the crank handle is in to raise the stage, with a person the closed and locked position. at each pole, place your foot on the upper foot each pole raising the stage about one foot each time.
-
Page 7: Do's And Don'ts
Always use stages with at least a 500 lb. capacity rating with pumpjacks. • Never have more than 2 people between any 2 poles of a pump jack scaffold. • The total weight of 2 workers and materials should not exceed 500 lbs. - Page 8 L O U I S V I L L E L A D D E R . C O M OCTOBER 2017 1.800.666.2811...