Getting Started With Your Blender & Soup Maker; Assembly; Auto-Iq Programs; Manual Cook - Ninja HB150UK Series Instructions Manual

GETTING STARTED WITH
YOUR BLENDER & SOUP MAKER
IMPORTANT: Review all warnings
before proceeding.

ASSEMBLY

1 Plug in motor base and place on a clean,
dry, level surface such as a worktop or table.
2 Lower the jug onto the motor base,
aligning the handle to the arrow on
the front right corner of the base.
3
Add ingredients, making sure not to exceed
the max fill lines on the side of the jug. In
COOK modes, DO NOT exceed the level
labelled HOT in BLEND mode, DO NOT
exceed the level labelled COLD.
Cold line
Soup line
(1.6L)
(1.4L)
9
0 8 0 0 8 6 2 0 4 5 3
4 To install the lid on the lid on the jug, place
the lid tab to the right of the handle. Press
the lid down until it is secure. Rotate the
tab clockwise so the arrow on the lid tab
aligns with the arrow on the jug handle.
5 Secure the centre cap by placing it down
into the lid and twisting clockwise until it
clicks into place.
6 To remove the lid from the jug, rotate the
lid anti-clockwise out of the lock position
and lift up.
NOTE: After heated programs, steam may
release as the lid is removed. Keep hands
on the outer tabs and lift directly up.
AUTO-IQ PROGRAMS
®
PRE-COOK PRE-COOK
1 To begin, press the Power button.
2 Press the program of your choice
from the BLEND, COOK or
PRE-COOK sections.
3 The Heat On light will turn on if
the selected program uses heat.
TIP: When making thicker recipes such
as ice creams and dips, use the tamper
to push ingredients towars the blades.
Tamper should only be used when lid is
attached to jug. Remove center cap and
replace with tamper.
NOTE: The unit will beep 3 times to alert
you the that the program is going to stir
ingredients. Make sure center cap is secure
during use.
MANUAL SETTINGS
PRE-COOK PRE-COOK

MANUAL BLEND

Manual Blend speeds give you ultimate
control over your blend.
1 To begin, press the Power button.
2 Choose BLEND to unlock speed options.
3 Select LOW, MED, HIGH, or PULSE to
begin blending.
NOTE: The Pulse setting will run only
when the PULSE button is pressed.

MANUAL COOK

Manual Cook settings puts the control in
your hands.
1 To begin, press the Power button.
2 Choose COOK to unlock temperature options.
3 Select LOW, MED, or HIGH to begin cooking.
4 Timer will count up to 60 seconds or until
manually stopped.
NOTE: You can press PULSE during Manual
Cook mode to gently stir ingredients.
NOTE: For best results, quickly PULSE
ingredients periodically during cooking to
distribute heat and promote even cooking.
n i n j a k i tc h e n . e u
10