LED's light 401713 Operating Manual

Specifications
Art Nr.
power (W):
Input voltage (V AC): 230V / 50 Hz
power factor
Luminous flux (lm):
Lumen/W
Color temperature (K): RGB + ~ 3.000K
Color description RGB + True warm white
Lifespan(h):
Switching cycles (on/off):
Beam angle:
Warm up-time (95%):
Dimensions (mm): Ø200 x H 195
Colour rendering index (CRI):
Energy class: RGB: A | Warm white: A++
LED type RGB: 5050 SMD
LED type Warm white: 5050 SMD
Protection class IP:
Dimmable Yes, via remote control
Cable type: 1,5m, H03VVH2-F
Plug type
Working temperature (T °C): -20°C ≤T ≤40°C
Housing: ABS + Ground glass
Packaging contents
1x LED Mood lamp
1x Manual
1x Remote
General safety instructions
Please read the operating instructions for the LED Mood lamp
before use. The operating instructions are part of the product.
They contain important notes on start-up and handling of the
device. Always keep the enclosed operating instructions so as
to be able to look up information. They must be enclosed when
passing the device on to third parties.
Safety precautions
The user must observe the safety notes and warnings in order
to maintain this status and to ensure safe operation. Please
read the operating instructions before start up.
Never attempt to open the device, the LED Mood lamp cannot
be repaired; this part must be immediately disposed in case
of a defect. Any other use of the device than described
can damage the product or endanger the user due to e. g.
short-circuits, fire or an electric shock. The entire product may
not be modified or adapted.
These safety notes must be observed in all cases! Any
warranty claim is void in the case of damages caused by
non-observance of these operating instructions. We are not
liable for consequential damages or for damages to property
or persons caused by non-observance of the safety notes and
improper operation of the device.
Safety notes
Safe operation is not possible anymore, if:
• the LED Mood lamp has visible damages,
• the LED Mood lamp does not work anymore
• Please ensure a safe and firm surface for the LED Mood
lamp to stand on.
• Please ensure that the cable is not getting squashed or
otherwise damaged.
Notes on Disposal
Old units, marked with the symbol as illustra-
ted, may not be disposed of in the household
rubbish.
You must take them to a collection point for
old units (enquire at your local authority)
or the dealer from whom you bought them.
These agencies will ensure environmentally friendly disposal.
Care and warranty
Before cleaning the unit, disconnect it if necessary from other
components; do not use aggressive cleaning agents.
The unit has been carefully checked for defects. If nevertheless
you do have cause for complaint, please go back to the retailer
where you have bought the product together with your proof
of purchase. The warranty for manufacturing faults runs for 1
year from the date of purchase. It excludes any compensation
401713
5
>0,42
250
50
25.000
20.000x
180°
<0,5s
Ra>80
IP20
Euro
how to activate the Remote control
for installation and other costs. The dealer or manufacturer
can change this guide at any time and without prior notice.
Visit us online at www.shada.nl for more information about
our products and our company.
CE declaration
This product is according next directives:
2014/35/EU
2014/30/EU
2011/65/EU
The complete Declaration of Conformity Document (DOC) can
be found here:
http://www.shada.nl/uploads/DoCs/index.html
Safety Class II
Where to place the lamp and where not
MV#:20170727
GB Operating Manual
Imported by
Kanaal Noord 350
NL-7323 AM Apeldoorn
www.shada.nl
WEEE NL: 3505
WEEE DE: 37281017
WEEE AT: 40133