Sony ZV-1 Help Manual page 410

Hide thumbs Also See for ZV-1:
Table of Contents

Advertisement

captured data fills the buffering capacity, old data is overwritten sequentially. When you press the MOVIE button, the
camera starts to record a movie of the set duration calculated retroactively from that point on the memory card.
With [End Trigger], a movie of the maximum possible duration is recorded. With [End Trigger Half], a movie of half
the maximum possible duration is recorded. With [End Trigger Half], the time it takes to record to the memory card is
also shorter than with [End Trigger].
End Trigger
End Trigger Half
(A): The point when the MOVIE button is pressed
(B): Recorded section
(C): Recording to memory card in progress (You cannot start the next session of shooting.)
(D): Buffering in progress
To redo shooting
You can cancel recording by selecting [Cancel] on the screen. However, the movie recorded up to the point you
cancelled will be saved.
Playback speed
The playback speed will vary as below depending on the assigned [
Frame
Rate
240fps/250fps
10 times slower
480fps/500fps
20 times slower
960fps/1000fps
40 times slower
*
Only when [NTSC/PAL Selector] is set to NTSC.
[
Priority Setting] and shooting duration
Priority
Setting
Quality Priority
Quality Priority
Quality Priority
Record Setting: 24p
50M*
8 times slower/10 times slower
16 times slower/20 times slower
32 times slower/40 times slower
Frame
Effective pixel number read out from image
Rate
240fps/250fps
1824×1026
480fps/500fps
1824×616
960fps/1000fps
1244×420
Frame Rate] and [
Record Setting: 30p
50M/25p 50M
sensor
410
Record Setting].
Record Setting: 60p
50M/50p 50M
4 times slower/5 times slower
8 times slower/10 times slower
16 times slower/20 times slower
Shooting
duration
Approx. 2 seconds
Approx. 1 seconds
Approx. 1 seconds

Advertisement

Table of Contents
loading

Table of Contents