Advertisement
Available languages
Available languages
ATTACHING AND REMOVING THE WHEELS
Lift the rear of the frame enough to allow you to insert the hub axle into
wheel axle of the trailer. Insert the hub axle all the way by pushing on the
hub until you hear an audible click. Check that the axle is secure and
inserted fully by grabbing the center of the hub and pulling away from trailer.
To remove the wheel, press the buttonhook underneath near the axle tube
while pulling the wheel away from trailer.
For easy towing and safe handling, check tires often for
proper inflation and wear. Check tire pressure regularly
and inflate tires to within the range shown on the tire
sidewall.
Failure to properly install could allow wheel to come off
during use. This could lead to serious injury.
ATTACHING THE REFLECTORS OR LIGHTING (OPTION)
Screw the reflectors on the top cover of trailer and the spoke reflector on
both sides of wheels. Make certain to tighten these screws securely.
34
WARNING
Advertisement
