Table of Contents
Advertisement
MAINTENANCE SCHEDULE
ent,
t in
Daily check
Bar lubrication
ual.
Chain tension
ake
sing
Chain sharpness
ally
the
For damaged parts
hain
For loose fasteners
vice
tion
Chain brake function
Inspect and clean
and
Bar
Complete saw
urity
at is
Chain brake
sed
Spare parts
Chain
Wear
Bar
nch
Exploded view
If needed, an exploded view of the tool can be ordered. Please
state the machine type printed as well as the six-digit No. on the
label and order the drawing at your local service agents or directly
ake
at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364
Winnenden, Germany.
rive
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
ove
Temperatures in excess of 50°C (122°F) reduce the performance
of the battery pack. Avoid extended exposure to heat or sunshine
ion"
(risk of overheating).
The contacts of chargers and battery packs must be kept clean.
nuts
For an optimum life-time, the battery packs have to be fully charged,
after used.
can
To obtain the longest possible battery life remove the battery pack
sult
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
the
Store the battery pack where the temperature is below 27°C and
away from moisture.
hain
Store the battery packs in a 30% - 50% charged condition.
Every six months of storage, charge the pack as normal.
tive
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
hing
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
r to
■
The user can transport the batteries by road without further
l for
requirements.
■
Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation
and transport are exclusively to be carried out by appropriately
trained persons and the process has to be accompanied by
corresponding experts.
Before each use
Before
each
use
and
frequently
Before
each
use,
visual
check
Before each use
Before each use
Before each use
Before each use
After each use
Every 5 hours of operation
Oregon
90PX045X
124MLEA041
When transporting batteries:
■
Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
■
Ensure that battery pack is secured against movement within
packaging.
■
Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
SYMBOLS
Safety alert
Read and understand all instructions before
operating the product, follow all warnings and
safety instructions.
Wear eye, ear and head protection.
Wear non-slip safety footwear when using the
product.
Wear non-slip, heavy duty gloves.
Wear eye and face protection.
Wear upper body protection.
Wear leg protection.
Beware of chain saw kickback and avoid contact
with bar tip.
Do not expose to rain or damp condition.
Moving direction of the chain.
(Marked under the chain cover)
Hold and operate the saw properly with both
hands.
Do not operate the saw using only one hand.
Remove the battery pack before starting any work
on the product.
Do not burn used battery packs.
Never charge a damaged battery pack. Replace
with a new one.
31
31
Advertisement
Table of Contents
