Setting The Ip Address - gefran GFX4-ETH1 Installation And Operation Manual

You can change the device's IP address by using the Gefran SetIPTools utility.
You can set:
- IP address
- NetMask
- Gateway address
- DHCP or BOOTP functionalities
Note: it is essential that the utility NOT be blocked by the Firewall and that UDP broadcast traffic be allowed in the
network.
When installation is done, you can launch the program by clicking the desktop icon.
The following screen is shown:
Step 1: click the Refresh list button
Step 3: click on the Mac address found to display the
values currently set on the device
Note: if you do not know or do not want to set the Gateway address, set the IP and Gateway the same.
6

SETTING THE IP ADDRESS

To install the tool, launch the executable and follow the instructions.
Step 2: the List of devices found (MAC) : ) window
shows the Mac addresses of the devices connected to
the network
Step 4:set the appropriate values for your network and
click the Apply changes button
80409D_MSW_GFX4-ETH1_04-2013_ENG