Dyson Pure Hot + Cool Link HP02 Operating Manual page 55

Replacing the filter unit
6
9
12
When you have re-assembled your appliance, press and hold the 'Standby ON/OFF' button for
6 seconds on the remote control to reset the filter indicator.
6 sec
7
10
clik
A clockwise-rotating loading pattern will be
shown on the LED display.
The Dyson Link app will notify you when your non-washable filter needs to be replaced.
The filter indicator can also be reset from within the Dyson Link app. Please note your
filter may require replacing more frequently with more use.
8
clik
11
Clean the hatch every time the
filter is replaced. Open the small
hatch on the side of the appliance.
Use a cotton bud to clean inside
and remove any debris. This
maintains sensor accuracy and
ensures the continuing high
performance of the appliance.
clik
Once the loading pattern is complete, the
appliance will return to its normal usage.
clik
55