Download Print this page

Troubleshooting - BUSCH WALKIE TALKIE FUN Operating Instruction

Advertisement

Available languages

Available languages

Operating Instructions
This two-way radio set is made for kids. Ideal in shape and size for small hands and
easy to handle. It fulfills the high requirements of toy safety. The talk range up to 2 km*
offers plenty of outside activities.
Read and follow this manual and safety precautions carefully before use. Please
retain instruction and packaging since they contain important information.
Battery installation: Switch off the radio and remove the belt clip (Fig. 1). An adult
should open the battery compartment door (Fig. 2) and insert 3 x AAA alkaline batteries
according to the anode and cathode signs shown in the battery compartment (and Fig. 3).
When batteries are installed, LCD will automatically indicate default channel 01. Close
the battery compartment door.
Please note: Don´t mix new and old, different styles, alkaline and rechargeable and
different capacity batteries. Batteries are to be inserted with the correct polarity. There
is danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. To avoid battery leakage remove batteries in case they are not used for
a longer time. If batteries are damaged, they should be disposed of carefully. Exhausted
batteries are to be removed from the toy. Do not dispose of the batteries to heat source
to avoid explosion. Never throw them into fire! Non-rechargeable batteries are not to be
recharged. Rechargeable batteries are to be removed from the toy before being charged.
Rechargeable batteries are only to be charged under adult supervision. The supply
terminals are not to be short-circuited. Attention should be drawn to the environmental
aspects of battery disposal.
Power On/Off: On: Press and hold key
sound indicates the unit is ready for use and the LCD will show current channel. Off:
Press and hold key
for 3 seconds to turn off the unit. A »BI« sound will also be
heard and the LCD will switch off.
Channel Setting: Select the same channel as that of your partner (01-08). When power
, a »BI« sound will be heard. LCD will show current channel flashing.
on, press key
Press key  p  or  q  to change the channel. Press key
wait 7 seconds for the unit to automatically switch to the selected channel.
To Make a Call: Press CALL key one time, the melody will ring on both units.
To Transmit & Receive a Signal: Press and hold PTT key and speak into the micro-
phone. While speaking the unit should be held about 5 cm off your mouth. Speak in
the direction of the microphone with normal voice. This will prevent distortion and
interference at the receiver´s end. Release the PTT key to receive a signal. Note: If PTT
key is pressed and held above 3 minutes, transmission will stop and a warning signal
sounds. Meanwhile, the partner who is in receiving status will stop receiving. Press PTT
key again, and transmission will continue. Do not touch the antenna during transmission.
Roger Beep: When releasing the PTT key, the unit changes into receiving status. A »BI«
sound will be heard in both units indicating the conversation is over.
Volume Setting: Press key  p  or  q  to select desired volume. There are four volume
levels: L1 (low minimum) up to L4 (loud maximum). Press key
setting. Or wait 7 seconds for the unit to automatically switch to the selected volume.
Auto Channel Scan: Press key
key  p  or  q  to start auto channel scan running through all channels. Channel scanning
stops once a signal is detected. Press key
show the same channel as transmitting unit. Note: Channel scanning can be interrupted
by pressing any key.
Low Battery Indication: When battery level becomes low, LCD will show »LL« and
a »BI BI« sound will be heard every 6 seconds. The unit can still be operated but LCD
keeps »LL« indication. Change the batteries to ensure correct operation of the radio.
Once the battery is too low, the unit will turn off automatically.
Auto Squelch: The auto squelch control eliminates unintentional interference during
communication.
*Communication Range: Up to 2 km in clear unobstructed conditions. Steel or con-
crete structures to each other or heavy foliage may decrease the communication range.
Clear unobstructed areas (e.g. at sea, from mountain top to mountain top) and radio
communication at night improve the operating distance.
for 3 seconds to turn on the unit. A »BI«
again to confirm the setting. Or
to confirm the
2 times, LCD »SC« will be flashing. Press
to confirm this channel. LCD will now
Trouble Shooting
No Power: Reposition or replace batteries.
Message not transmitted: Make sure the PTT button is completely pressed during trans-
mission. Reposition or replace batteries. Make sure the microphone hole is not blocked.
Message not received: Confirm radios have the same channel settings. Make sure PTT
is not inadvertently being pressed. Obstructions operating indoors or in vehicles may
interfere with communication. Change your location. Check to make sure volume is
loud enough to be heard. Reposition or replace batteries.
Hearing other conversation or noise on a channel: Shared channel may be in use.
Try another channel.
Limited talk range: Steel/concrete structures between each other, heavy foliage will
decrease talk range. Check for clear line of sight to improve transmission. Wearing radio
close to body such as in a pocket or on a belt will decrease range, change location of radio.
Interferences: Radios are too close to each other. The distance in between must be at
least 2 meters apart, increase your distance. Or radios are too far apart. Obstacles may
interfere with transmission.
Important Information
Do not use this radio nearby pacemakers. Turn it off as soon as interference with medical
equipment is taking place. Do not use the radio in airplanes, hospitals or any area with
potentially explosive atmosphere. Do not operate the radio if you detect any damage of
antenna or housing. Kindly note that this product is using the common communication
channel. If there are other users on the same channel, there is the possibility to receive
signals from these other users as well.
Protect your radio from dirt, dust, water and moisture as well as from high temperature
due to solar irradiation. To reduce the risk of electric shock do not expose this appliance
to rain or moisture. To clean your radio use a soft cloth dampened with water. Do not
use corrosive chemical solvents as they may harm the body of the unit and leak inside
causing permanent damage.
Never open the radio´s case or adjust the settings inside of it. Never change or replace
anything in your radio except the batteries, otherwise warranty will extinguish. Only
use batteries – never connect this appliance to any other power source.
Disposal of this product
The crossed out wheeled bin symbol that can be found on your product indicates
that this item should not be disposed of via the normal household waste stream.
To prevent possible harm to the environment separate this product from other waste
streams to ensure that it can be recycled in an environmentally sound manner. For more
details or available collection facilities please contact your local government office.
European User Regulations
No licence and no fees are required for the use of this PMR Walkie Talkie FUN (no.
2616) in EC countries* and Switzerland. If operated in other countries it is absolutely
necessary to check the local, prevailing regulations.
*Italy: There is an obligatory registration and a one-time fee for users living in Italy.
EC Regulations
Hereby, Busch GmbH & Co. KG declares that this two-way radio »Walkie
Talkie FUN« (No. 2616) is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at www.busch-model.com.
Warning. Not suitable for children under three years. Choking hazard due
to small parts. Please retain this information.

Advertisement

loading

This manual is also suitable for:

2616