Table of Contents
Advertisement
Figure 6 Connect an AC power cord
Connecting a DC power cord
Follow these steps to connect the DC power cord:
Step1
Take off the protection cover.
Step2
Use a No. 2 Phillips screwdriver to loosen the screws on the wiring terminals.
Step3
Connect the end of the blue DC power cord marked with – to the negative
terminal (–) on the power supply, and fasten the screw.
Step4
Connect the end of the black DC power cord marked with + to the positive (+)
terminals on the power supply, and fasten the screw.
Step5
Put the protection cover on the wiring terminals.
Step6
Connect the other ends of the DC power cords to the wiring terminals that provide
a power supply to the switch.
7
Advertisement
Table of Contents
