Table of Contents
Advertisement
VSi,VS,RF Series Maintenance Guide
Note:
Never use gasoline, alcohol, thinner, or any other flammable material.
Doing so may cause fire.
Note:
Before attempting cleaning, switch off the sub power and wait until the platen and dryer
cool (approximately 30 minutes).
Wipe away any buildup of ink or grime on the media path and other locations as daily cleaning.
In particular, the pinch rollers, grit rollers, and platen are likely to get buildup of grime. Clean by
wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
Note:
This machine is a precision device, and is sensitive to dust and dirt. Perform cleaning on a
daily basis. Never attempt to oil or lubricate the machine.
Advertisement
Table of Contents
