Advertisement
MAINTENANCE
1. Perform visual, electrical, and mechanical inspections on a regular basis. The environment and
frequency of use should determine this. However, it is recommended that checks be made at least
once a year. We recommend an Electrical Preventive Maintenance Program as described in the
National Fire
2. Protection Association Bulletin NFPA No. 70B: Recommended Practice For Electrical Equipment
Maintenance (www.nfpa.org).
3. The lens should be cleaned periodically to ensure continued lighting performance. To clean, wipe the
lens with a clean, damp cloth. If this is not sufficient, use a mild soap or a liquid cleaner such as
Collinite NCF or Duco #7. Do not use an abrasive, strong alkaline, or acid cleaner. Damage may result.
4. Visually check for undue heating evidenced by discoloration of wires or other components, damaged
parts, or leakage evidenced by water or corrosion in the interior. Replace all worn, damaged, or
malfunctioning components, and clean gasket seals before putting the luminaire back into service.
5. Electrically check to make sure that all connections are clean and tight.
6. Mechanically check that all parts are properly assembled.
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
EXP-EMG-EXT-LE6-4L
www.larsonelectronics.com
6
Advertisement
