Related Manuals for MasterCraft 060-0590-0
Summary of Contents for MasterCraft 060-0590-0
- Page 1 2-IN-1 SELF-PROPELLED BRUSHLESS LAWN MOWER 060-0590-0 INSTRUCTION IMPORTANT: Read and understand this instruction manual thoroughly MANUAL before using the product.
- Page 2 headline bars headline bars headline bars continuation tabs continuation tabs continuation tabs notes notes notes warnings warnings warnings...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Technical Specifications Safety Guidelines Key Parts Diagram Operating Instructions Maintenance Troubleshooting Parts List Warranty NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-800-689-9928. SAVE THESE INSTRUCTIONS •... -
Page 4: Technical Specifications
060-0590-0 | contact us 1-800-689-9928 TECHNICAL SPECIFICATIONS Rated Voltage 40 V d.c. max.* Deck Size 19” (48 cm) Cutting Height 1 1/2 to 3” (3.8 to 7.6 cm) *Maximum battery voltage without workload; with workload nominal voltage is 18 V. -
Page 5: Safety Guidelines
SAFETY GUIDELINES: WARNING! Safety symbols in this Instruction Manual are used to flag possible dangers. The safety symbols and their explanations require your full understanding. The safety warnings do not, by themselves, eliminate any danger, nor are they substitutes for proper accident prevention measures. - Page 6 060-0590-0 | contact us 1-800-689-9928 CHILDREN SPECIFIC • Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and mowing activity. Never assume that children will remain where you last saw them.
- Page 7 • Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to each mowing. • If lawn mower strikes a foreign object, follow these steps: 1) Stop lawn mower; release the switch.
- Page 8 060-0590-0 | contact us 1-800-689-9928 OPERATION ON A SLOPE Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it.
- Page 9 ....DANGER–Steep slope hazard. Use extra caution on slopes. Do not mow slopes greater than 15 degrees. WARNING! To reduce the risk of electric shock or damage to the charger and battery, use only the Mastercraft battery and chargers listed. ® BATTERY PACK...
-
Page 10: Key Parts Diagram
060-0590-0 | contact us 1-800-689-9928 PACKAGE CONTENTS: Cordless lawn mower, grass collection bag, mulching insert (inside of the mower). KEY PARTS DIAGRAM continuation tabs continuation tabs continuation tabs notes notes notes Description No. -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS fig. 1a Supporting Upper hole plate UNFOLD THE HANDLE BAR (fig. 1) 1. Put the product on the ground. Note that it is delivered with the handle bar in its storage position. 2. Pull the clamp lever outwards, hold it in position, and then rotate the lower handle bar clockwise to Lower put the product from storage to working position. - Page 12 060-0590-0 | contact us 1-800-689-9928 ATTACH/REMOVE THE MULCHING INSERT fig. 2 Rear-discharge (fig. 2) door 1. Lift the rear-discharge door and insert the mulching insert into the grass outlet of the mower, then release the rear-discharge door.
- Page 13 TO ATTACH THE BATTERY (fig. 5) fig. 5 Battery-release 1. Open the protective cap of the battery button compartment. Protective 2. Align the raised portion on the battery pack with the grooves inside of the battery compartment, and then slide the battery pack onto the mower. 3.
- Page 14 060-0590-0 | contact us 1-800-689-9928 START/STOP THE MOWER (fig. 7) fig. 7 Start-propelling lever 1. Install the battery packs into the mower, insert the safety key into the key slot and then close the battery compartment.
-
Page 15: Maintenance
9b using a suitable wrench and remove it together with the blade. 4. Attach a new blade of the same type (MASTERCRAFT 060-1542-0 replacement ® mower blade) onto the spindle while maintaining the correct alignment. Insert the hex bolt on the spindle. - Page 16 060-0590-0 | contact us 1-800-689-9928 STORAGE 1. Switch the product off, disconnect the safety key and remove the battery packs. 2. Clean the product as described above. 3. Follow the reverse order of “UNFOLD THE HANDLE BAR” to fold the lawn mower for storage.
-
Page 17: Troubleshooting
TROUBLESHOOTING Problem Possible causes Solutions The battery is depleted. Charge the battery pack. The motor or the battery is Raise the cutting height, and restart overloaded. the tool again. Wait for the battery or tool to cool The mower doesn’t The battery or the tool is too hot. -
Page 18: Parts List
060-0590-0 | contact us 1-800-689-9928 EXPLODED VIEW continuation tabs continuation tabs continuation tabs continuation tabs continuation tabs continuation tabs notes notes notes notes notes notes warnings... - Page 19 No. Part no. Description Part no. Description 0600590001 Right Front Wheel Cover 0600590033 External Circlips 0600590002 Hexagonal Nut 0600590034 R Gear 0600590003 Right Front Wheel 0600590035 0600590004 Wave Washer 0600590036 Ball Bearing 0600590005 Square Head Bolt 0600590037 Screw 0600590006 Front Wheel Bracket 0600590038 Bearing Housing 0600590007...
- Page 20 060-0590-0 | contact us 1-800-689-9928 0600590065 Cap Nut 0600590098 Return Spring 0600590066 Corrugated Pipe 0600590099 Push Button 0600590067 Folding Plate 0600590100 Sliding Sleeve 0600590068 Rotating Shaft 0600590101 Limit lock Shaft 0600590069 Elastic Pin...
- Page 21 131 0600590131 Self Locking Button 0600590135 Power Cord 132 0600590132 Upper Operation Panel 0600590136 Protective Cover 133 0600590133 Power Cord 0600590137 Pressing Plate 134 0600590134 Power Cord 0600590138 Screw If any parts are missing or damaged, or if you have any questions, please call the toll-free helpline at 1-800-689-9928.
-
Page 22: Warranty
060-0590-0 | contact us 1-800-689-9928 This product is guaranteed for a period of 3 years from the date of original retail purchase against defects in workmanship and materials, except for the following components: a) Component A: Batteries, chargers and carrying case, which are guaranteed for a period of 2 years from the date of original retail purchase against defects in workmanship and materials;... - Page 23 The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim or exclude any statutory warranties set forth in any applicable provincial or federal legislation. Made in China Imported by Mastercraft Canada Toronto, Canada M4S 2B8...
Need help?
Do you have a question about the 060-0590-0 and is the answer not in the manual?
Questions and answers
How to lower handle I’m short
How to lower handle
To lower the handle on a MasterCraft 060-0590-0:
1. Press the unlock button and hold it in position.
2. Gradually push the upper handle bar down until it reaches the lower hole on the supporting plate.
3. Ensure the lock pin of the clamping lever engages in the lower hole.
4. Release the unlock button and confirm the handle bar is secured.
Do not use sudden force when adjusting the handle.
This answer is automatically generated
The blade is not spinning, not cutting the grass
The blade on the MasterCraft 060-0590-0 may not be spinning or cutting grass due to the following reasons:
1. The blade is bent, damaged, or worn from prolonged use, especially in sandy soil. It should be replaced to restore cutting efficiency.
2. The discharge chute may be clogged, which can affect blade performance. Clean the deck or chute.
3. The mower may need adjustment or repair. Ensure the blade and underbody are clean and free of debris.
4. The safety key or battery pack might not be properly installed. Remove and reinsert them correctly.
This answer is automatically generated
The blade is not turning
The blade on the MasterCraft 060-0590-0 may not be turning due to the following reasons:
1. The blade may be bent or damaged and needs replacement.
2. The discharge chute may be clogged, affecting blade rotation.
3. The motor/blade may not have fully stopped before restarting, which can prevent proper operation.
4. The safety key or battery pack may not be properly installed.
Ensure the mower is clean, the blade is in good condition, and the battery and safety key are correctly inserted.
This answer is automatically generated
How to adjust handle
To adjust the handle on a MasterCraft 060-0590-0:
1. Rotate the handlebar until the lock pin of the clamping lever engages in either the upper or lower hole on the supporting plate, depending on the required handle height.
2. Press and hold the unlock button.
3. Gradually pull out the upper handlebar until it reaches the STOP position.
4. Release the unlock button and ensure the upper handlebar is secured.
Important Notes:
- Pull or push the upper handlebar gently without using sudden force.
- The handlebar can only be secured in the lower or upper position.
- The power can only be activated when the upper handlebar is secured at the STOP position.
- Avoid holding the handlebar at the joints to prevent hand or finger pinching.
This answer is automatically generated