Important Notes; Parts And Materials - 3M Filtrete Standard Use & Care Manual

• Where a booster pump is installed on a water
system, you MUST maintain and inspect the
attached pressure switch regularly in accordance
with the booster pump manufacturer's
instructions. Contact a plumbing professional
if you are uncertain how to maintain your booster
pump system.
• Where a booster pump is installed on a water
system, you MUST install an appropriate
pressure relief valve. Pressure relief valve must
be maintained and inspected every 6 months.
Contact a plumbing professional if you are
uncertain how select/install/maintain a pressure
relief valve.
• Where a booster pump is installed on a water
system, you MUST install an appropriate pressure
regulating valve and regulate water pressure to
<80psi. Contact a plumbing professional if you
are uncertain how select/ install/maintain a
pressure regulating valve.
• DO NOT install in direct sunlight or outdoors.
• DO NOT install near water pipes which will be in
path of a drilling tool when selecting the position to
mount the bracket.
To reduce the risk of water leakage or fl ooding, and to ensure optimal
fi lter performance:
• Change the disposable fi lter cartridge every six months or sooner if you observe a noticeable
reduction in water fl ow rate.

IMPORTANT NOTES

• Failure to follow instructions will void warranty.
• Allow a minimum of 2 1/2" clear space under fi lter to facilitate cartridge change.
• Install with the inlet and outlet ports as labeled. Make sure not to reverse connections.

PARTS AND MATERIALS:

(A)
(B)
(C)
NOTE: White tube on fi lter head assembly bracket (B) is a pressure relief outlet. Water will NOT fl ow out of this tube.
• Mount fi lter in such a position as to prevent it from
• Ensure that the location and fasteners will support
• Ensure all tubing and fi ttings are secure and free
• DO NOT install unit if collet is missing. Contact 3M
• Use compatible fl exible tubing with "push-in
• DO NOT install with rigid piping (such as copper,
(included)
(D) (E)
3
being struck by other items used in the area of
installation.
the weight of the system when installed and full
of water.
of leaks.
if collets are missing from any fi ttings.
connections" (such as PEX tubing, PE tubing,
PP tubing)
aluminum, stainless steel, chrome plated, or
anodized tubing).
(F) (G)
Filter (3US-AF01 or 3US-PF01) (A)
Filter head assembly bracket (B)
2 – 3/8" blue tubing (C)
3/8" male water supply line adapter (D)
3/8" compression hex nut (E)
3/8" ferrule (F)
3/8" tube insert (G)
2 – #2 mounting screws (H)
Time Strip (I)
(H) (I)