Selecting Stereo/Second Audio Program (Sap) - Zenith 206-3923 Operating Manual

Selecting Stereo /Second Audio Program (SAP)
30

Selecting Stereo/Second Audio Program (SAP)

The multi-channel TV sound (MTS) feature provides high-fi delity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word "STEREO"
or "SAP" displays on-screen every time you turn the TV on, change the
channel, or press –/DISPLAY.
To set the SAP
1
Press MENU/ENTER in the analog
mode, then press
(OPTION) menu.
2
Press or to select "SAP", then
press or to select "ON" or "OFF".
3
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
To listen to stereo sound
When the TV is turned on or a channel selection is made, the STEREO
will appear on the screen. This means that Stereo broadcasting is
available. You can enjoy stereo sound from the left and right speakers.
• When mono broadcasting is received, no indication is displayed.
• If the broadcasting signal is not strong enough or clear stereo sound is
not available, press AUDIO to change to mono sound. The noise
should be eliminated. Press it again to return to the stereo sound.
To listen to second audio program (SAP)
When the TV is turned on or a channel selection is made, SAP will
appear on the screen. This means that the Second Audio Program
broadcasting is available.
or to display