Zenith 206-3923 Operating Manual page 11

Connections to other equipment (continued)
To connect the TV to a DVD player with component video
If your DVD player has component video out jacks, connect your TV to a DVD player using a component video
cord. It can greatly enhance picture quality and performance.
To AUDIO OUT To COMPONENT OUT
Y P P
B R
To COMPONENT IN
VIDEO cord (not supplied)
AUDIO cord (not supplied)
To AUDIO IN
Rear of the TV
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video
outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, "COMPONENT" and "NO SIGNAL
OR NOT SUPPORTED VIDEO RESOLUTION" will be displayed on a black screen. If this screen appears, set the
digital device's component output to 480i.
To connect the TV to a set-top box
If you connect a set-top box, connect your TV to it by using a component video cord.
To AUDIO OUT To COMPONENT OUT
To COMPONENT IN
VIDEO cord (not supplied)
AUDIO cord (not supplied)
To AUDIO IN
Rear of the TV
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video
outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, "COMPONENT" and "NO SIGNAL
OR NOT SUPPORTED VIDEO RESOLUTION" will be displayed on a black screen. If this screen appears, set the
digital device's component output to 480i.
To connect an audio system
Amplifi er
To AUDIO IN
Rear of the TV
AUDIO cord (not supplied)
11
To AUDIO OUT