Advertisement
1
Assembling the Base Section
Align the four parts of the Base Section (F) and insert the connecting
rods on each part into the matching holes with the adjacent part and
fasten together with Plastic Tie (H).
3. Assembling the Third Section to the Second Section
Insert the metal connecting rods on the bottom of the Third Section (D)
into the matching holes on the top of the Second Section (E) and fasten
together at the connecting loops with Plastic Tie (H).
5. Assembling the Fifth Section to the Fourth Section and
the Spire
Insert the metal connecting rods on the bottom of the Fifth Section (B)
into the matching holes on the top of the Fourth Section (C) and fasten
together at the connecting loops with Plastic Tie (H). Insert the metal
connecting rods on the Spire (A) into the matching holes on the top of the
Fifth Section (B) and fasten together at the connecting loops with Plastic
Tie (H).
ASSEMBLY
2
Assembling the Second Section to the Base Section
Align the two parts of the Second Section (E) and insert the connecting
rods on both parts into the matching holes with the adjacent part and
fasten together with Plastic Tie (H). Stand the Base Section (F) in an
upright position then insert the metal connecting rods on the bottom of the
Second Section (E) into the matching holes on the top of the Base Section
(F) and fasten together at the connecting loops with Plastic Tie (H).
4. Assembling the Fourth Section to the Third Section
Insert the metal connecting rods of the bottom of the Fourth Section (C) into
the matching holes on the top of the Third Section (D) and fasten together
at the connecting loops with Plastic Tie (H).
6
Assembling the Ground Stakes
Secure the Eiffel Tower to the ground using the Ground Stakes (G).
Advertisement
