Table of Contents
Advertisement
SETUP
4. Connect to Wi-Fi
To use the sound bar's Wi-Fi features, the sound bar and your mobile device
must both be connected to a Wi-Fi network. The app will guide you through the
process, follow the on-screen instructions and have your network password ready.
After the initial connection, the speaker will remember the Wi-Fi network and
automatically connect to it when it is in Wi-Fi Mode. If the speaker should become
disconnected or will not connect normally, repeat the steps below.
Initial Wi-Fi Connection
Note: If you have a dual band wireless router, be sure to connect to the 2.4GHz
band, not the 5GHz band.
1. Press and hold the Power button to power on the sound bar. A voice will
announce, "Power On, Wi-Fi Mode". Following this, you'll hear a chime and the
voice will announce, "Entering Setup Mode". It may take the speaker a minute or
two to run through this process, please be patient.
2. The speaker is now ready for setup. Open the iLive Wi-Fi app on your device
and press "Search", then "Add Device" (Image A, B, below).
A.
B.
12
Advertisement
Table of Contents
