Turn Signals And Lane Change Signals - Kia Cerato Owner's Manual

Features of your vehicle
■
Type A
■
Type B
To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.
4 110
Turn signals and lane change
signals
■
Type A
OAM049043R-1
■
Type B
OBK049049
The ignition switch must be on for the
turn signals to function. To turn on
the turn signals, move the lever up or
down (A). The green arrow indicators
on the instrument panel indicate
which turn signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change, move the
turn signal lever slightly and hold it in
position (B). The lever will return to
the OFF position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
OAM049045R-1
burned out and will require replace-
ment.
OBK049051