Power Windows - Kia Cerato Owner's Manual

Power windows (if equipped)
The ignition switch must be in the ON
position for power windows to operate.
Each door has a power window
switch that controls the door's win-
dow. The driver has a power window
lock button which can block the oper-
ation of passenger windows. The
power windows can be operated for
approximately 30 seconds after the
ignition key is removed or turned to
the ACC or LOCK position. However,
if the front doors are opened, the
power windows cannot be operated
even within the 30 second period.
The driver's door has a master power
window switch that controls all the
windows in the vehicle.
If the window cannot be close because
it is blocked by objects, remove the
objects and close the window.
✽ ✽ NOTICE
Whilst driving with the rear win-
dows down or with the sunroof (if
equipped) in an open (or partially
open position), your vehicle may
demonstrate a wind buffeting or
pulsation noise. This noise is a nor-
mal occurrence and can be reduced
or eliminated by taking the follow-
ing actions. If the noise occurs with
one or both of the rear windows
down, partially lower both front
windows approximately one inch.
If you experience the noise with the
sunroof open, slightly reduce the
size of the sunroof opening.
WARNING
Do not install any accessories
in the area of windows. It may
impact jam protection.
Features of your vehicle
Window opening and closing
OYDECO2017R
Type A
To open or close a window, press
down or pull up the front portion of
the corresponding switch to the first
detent position (5).
4 35