Titanwolf 301659 User Manual page 23

5.3 Creating macros
Macros are recordings of specific key sequences, which can be run by pressing a
single mouse button depending on the configuration. This can, for example, be key-
strokes or mouse commands. To define a macro, please click on the desired button
and then select "Macro" and "Macro Manager" from the list as described in section
5.2.1. To start recording a new macro, first click on "New" and then specify a name.
Then the recording can be started using the button and stopped using .
Additional options are available on the right side of the Macro Manager for re-
cording the steps. Thus you can define whether the time between pressing the
individual buttons and the stop times are measured and recorded, whether you
want to configure a fixed delay as desired or whether the recorded macro is exe-
cuted several times when the mouse button is pressed. The option of editing the
recorded steps subsequently is also available.
Note: Please remember the "Z" and "Y" are reversed. To configure, use the other
letter than the one desired to obtain the right result.
23
English