Table of Contents
Advertisement
GENERAL MAINTENANCE
General Lubrication
The example illustration below indicates the general locations of lubrication points - all
points should be greased on a daily basis and prior storage of the machine.
Gearbox Lubrication
Refill the gearbox after an initial 50 hours of use and thereafter at annual or 500 hour
intervals, whichever occurs earliest.
Gearbox Capacity
The gearbox capacity is 700 millilitres (1¼ pints) and the oil type is EP90
Refilling or 'topping up' the oil is via the filler plug located on the side of the gearbox to a
point where the oil starts to run from the level plug orifice – replace the plug and tighten
securely. Never attempt to fill or 'top up' the gearbox by removing the breather located on
the top of the gearbox.
34
Advertisement
Table of Contents
