Wahl Moser Prima Operating Instructions Manual page 10

Cord/cordless hair clipper
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
ENGLISH
Caution! Danger from aggressive chemicals.
de
Aggressive chemicals could damage the appliance
and accessories.
en
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
fr
mended by the manufacturer.
Accessories and spare parts are available from your
it
dealer or our service centre.
es
f Remove the attachment comb (Fig. 4ⓑ) after every use
and lift the blade set out of the housing (Fig. 6ⓐ). Use the
pt
cleaning brush to remove any cut hairs from the housing
opening and from the blade set (Fig. 7).
nl
f Only wipe the appliance with a soft, slightly damp cloth.
f Clean the blade set using the hygienic spray.
da
f Oil the blade set with the blade set oil (Fig. 8).
sv
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
f If the cutting performance deteriorates after long
no
use despite regular cleaning and oiling, the blade
set should be replaced.
fi
Changing the blade set
tr
1. Slide the blade set off the housing in the direction of the
arrow (Fig. 6ⓐ). Remove the blade set.
pl
2. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 6ⓑ).
cs
sk
Problem elimination
Blade set is cutting badly or pulling hair out.
hr
Cause: Blade set is dirty or worn out.
f Clean and oil the blade set (Fig. 7/8); if this does not resolve
hu
the problem, replace the blade set.
sl
Skin injury
Cause: Too much pressure on the skin.
ro
f Reduce pressure when cutting close to skin.
bg
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use
ru
and replace the blade set if necessary.
uk
Battery operating time is too short.
Cause: Blade set and housing opening are dirty.
et
f Clean and oil the blade set (Fig. 7/8).
lv
Cause: Battery is worn out.
f Have the battery replaced at a service centre.
lt
Charging indicator light does not light up.
el
Cause: appliance socket is dirty.
f Clean appliance socket (D).
ar
10
Cause: Appliance is not switched off.
f Switch off the appliance using the on/off switch (Fig. 3ⓑ).
Cause: Defective power supply.
f Ensure that the plug-in transformer is plugged into the
mains socket.
f Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to
repair the appliance yourself!
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1586

Table of Contents