Nintendo Switch Lite Manual page 2

What to Do:
1. Reset the AC adapter by leaving it unplugged from both ends for at least 30 seconds.
o While performing this step, verify you are using the Nintendo Switch AC adapter (model
No. HAC-002) and check for any cuts, kinks, frayed cables, etc.
The Nintendo Switch AC Adapter
o If any damage is found, or if a different charger is being used, replacing it with the
correct accessory may resolve the problem.
You can purchase the Nintendo Switch AC adapter from our
2. With the Joy-Con controllers
Button once on each controller.
3. After resetting the AC adapter and the Joy-Con,
the AC adapter directly to the console and to a wall outlet.
o The LCD screen will power on and the battery charging indicator will momentarily be
displayed on the upper left corner of the LCD screen.
Important

detached
If the battery charge on the console is nearly depleted when the AC adapter is
first plugged in, the screen will remain off and a charging indicator will be
from the console, reset them by pressing the
attach the Joy-Con
Online Store.
SYNC
to the console, then connect