The Control Panel - Zanussi ZWD 1662 W Instruction Booklet

The Control Panel

1 Detergent dispenser drawer
2 Programme selector dial
The selector dial is divided into the following sections:
•
Cottons
•
Synthetics
•
Delicates
•
Wool (Handwash)
•
Soak 30, Rinses, Softener, Drain, Spin and Mini
30°
•
"O" Off = Reset/Switching the machine off
The selector dial can be turned either clockwise or
anticlockwise.
E- position corresponds to the ENERGY SAVING
programme for cotton and position "O" Off to Reset
programme/Switching off of the machine.
corresponds to a cold wash.
At the end of the programme the selector dial must be
always turned to position "O" Off , to switch the
machine off .
Attention!
If you turn the programme selector dial to another
programme when the machine is working, a warning
message appears for 3 seconds on the display.
3 "Spin" button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washer-dryer or to choose
the "Rinse Hold" option. The relevant light will
light up.
Maximum speeds are:
for cottons: 1600 rpm
•
for synthetics fabrics and Wool: 900 rpm;
•
for delicate fabrics and Mini 30°: 700 rpm.
•
"Rinse Hold" position: when you choose this
option, the machine will not drain the water of the last
rinse, so as not to crease the laundry.
At the end of the cycle, the light of the "Start/Pause"
button goes out, the "End cycle" light illuminates but
the door is locked to indicate that the water must be
drained. A flashing zero appears on the display.
To complete the cycle, there are 2 possibilities:
• Select programme "Drain" and then depress the
Start/Pause button: the water is emptied out without
spinning.
• Select programme "Spin". Select the spin speed by
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
6