The Control Panel - Zanussi ZWD 1251 W Instruction Booklet

The Control Panel

1 On/Off button
Press this button to switch the machine on. The display
(9) will show three blinking dashes or a blinking zero.
You will find more detailed explanations on page 7 and
8 (see "Display").
Press the "On/Off" button again to switch the machine
off.
2 MAINS-ON light
This light is connected to the "On/Off" button. It lights
up when you press the button, and goes out when you
press it again.
3 "Fabrics" button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
machine will propose a temperature and automatically
select the maximum spin value provided for the
programme you have chosen. You can change these
values by operating buttons 4 and 5.
Cotton daily
To be used for lightly soiled cotton items in order to
obtain a good washing performance in a short time.
Wool / Handwash
When you select this programme, you obtain a
particularly delicate wash, suitable for articles of
clothing whose label indicates that they must be hand-
washed .
4 "Temperature" button
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
machine. The relevant light will light up.
Maximum temperatures are 95°C for Cottons and
"Cotton daily" programme, 60°C for Synthetics, 40°C
for delicate fabrics, Wool and fabrics to be hand-
washed (Wool / Handwash programme).
5 "Spin Speed" button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the machine. The relevant
light will light up.
Maximum speeds are:
• for cotton: 1,200 rpm;
• for synthetic fabrics, delicates, wool and fabrics to be
hand-washed: 900 rpm;
"Rinse Hold" position: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
At the end of the cycle, the door locked light is on and
the door is locked. The "Start/Pause" button light goes
off, the "Rinse Hold" button light remains lit to
indicate that the water must be drained and a flashing
zero will appear on the display.
To complete the cycle press the "Skip/Reset" button
once, so as to cause all the lights to go off; the display
will show three blinking dashes.
6