Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL "LENOX"
Electric Fireplace: Wall Mounted / Built-in
N O B L E F L A M E
AC 220-240V 50Hz 1400-1600W
Read and understand this entire owner's manual, including all safety
information, before plugging in or using this product. Failure to do so could
WARNING
result in fire, electric shock, or serious personal injury.
Keep this owner's manual for future reference. If you sell or give this
CAUTION
product away, make sure this manual accompanies this product.
Advertisement
Table of Contents
Related Manuals for Noble Flame Lenox
Summary of Contents for Noble Flame Lenox
- Page 1 OWNER’S MANUAL “LENOX” Electric Fireplace: Wall Mounted / Built-in N O B L E F L A M E AC 220-240V 50Hz 1400-1600W Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could WARNING result in fire, electric shock, or serious personal injury.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION! WARNING ⚫ Read all instructions before using this heater! ⚫ This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear. - Page 3 ⚫ This product is not intended to be a primary heat source. It is for supplemental heat only. ⚫ INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! ⚫ Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ⚫...
-
Page 4: Parts And Hardware
Parts and Hardware B – Wood Screws C – Drywall Anchors Remote Control A – Fireplace E-Wall Bracket F-Decorative G-Decorative H - Log set I - Plastic Tray Pebbles Crystals Fixed on back of firebox Specification and Dimension Description Electric Fireplace Type 3 Way Mounting Unit Wall-Mount,... -
Page 5: Installation And Assembly
Note: Selection a dry wall to open a hole for fireplace box. Size of hole as below chart Figure (A). After connecting the power supply then insert the fireplace into the hole (Make sure to fix the fireplace well to avoid damage) Model Number LENOX 455mm 645mm 160mm... -
Page 6: Wall Mounted Installation
Wall Mounted Installation Due to the many different materials used on different walls, it is highly recommended that you consult your local builder before you install this appliance on the wall. Select a location that is not prone to moisture and is located at least 36" (914mm) away from combustible materials such as curtain drapes, furniture, bedding, paper, etc. - Page 7 Log set / Crystal / Pebble Ember Installation (NOTE: Please make the installation according to the embers which you bought or selected.) Glass front must be removed and the appliance must be mounted in its final location before the log set / crystal / pebble embers are installed. If your fireplace come with log set, remove the log set from the package, put it to the fireplace designed place.
-
Page 8: Operation
Figure 3. (Crystal medias) Figure 3. (Pebbles medias) Operation Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death. Power Make sure the ON/OFF switch, located on the left side panel, is in the OFF position. - Page 9 Touch Panel / Remote Control Operation Touch Panel Display Heater Timer Colour Flame Power BUTTON FUNCTION ACTION & INDICATION ON: Enables control panel functions and 1. Press once. Indicator light turns on. remote control. Turns on flame effect. Power turns on. All functions enabled. OFF: Disables control panel functions and 2.
- Page 10 COLOUR button: Makes the colour flame 1. Press once. Flame color effect gets effect changing. changing. NOTE: color effect stays on until power 2. Press again until desired setting is button is turned off. Color flame effect reached. Total 3 colors. must be on for heater to turn on.
-
Page 11: Care And Maintenance
Care and Maintenance Cleaning ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.