Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Rear hitch
Pin
Cotter
Decal 109-7076
Installing the Rear Hitch
G006495
1. Square hole, rear bumper
2. Rear hitch, tongue facing
rearward
1
2
3
4
Figure 1
3. Pin
4. Cotter
Qty.
1
1
Install the rear hitch.
1
1
Install the decal.
Installing the Decal
1. Thoroughly clean the area where you will install the
decal.
2. Dampen the area with water or mildly soapy water.
3. Peel the decal from the backing and install it in place.
4. Squeegee across the surface of the decal, starting
at the center of the decal and working toward the
edges, using overlapping strokes.
2
Use
Figure 2
Advertisement
