Maintenance; Specifications - Protege Pumps PMPPWCPROB4C0 User Manual

Electric Water Pump with Controller

Maintenance

•
Our pumps do not require any maintenance provided one takes the following precautions:
•
When there is a risk of freezing, empty the pump through the drain plug on the bottom of the pump body,
making sure you prime it when subsequently starting it again.
•
Check that the foot valve is clean at regular intervals.
•
If the pump is to remain unused for a long period of time (e.g. in the winter), it is advisable to empty it
completely, rinse it with clean water and store it in a dry place.
•
If the shaft does not turn freely, release it with a screwdriver by inserting it in the special slot. If this is not
sufficient to solve the problem, remove the pump body, undoing the relevant mounting bolts, and clean it
thoroughly to remove any encrustations.
ATTENTION: If the supply cord is damaged, it must be replaced by the manufacturer or a similarly qualified
technician in order to avoid a potential safety hazard.
Never carry out any work on the pump without having first disconnected it from the mains supply.

Specifications

SKU
Brand
Power kW
Maximum Head Height
Water Pump Inlet
Water Pump Outlet
Flow Rate
Colour
Product Weight (kg)
Height
Length
Width
Gross Weight
PMPPWCPROA4C0
PROTEGE
2,350W / 3.15hp
80m
1" (25mm)
1" (25mm)
7,200L/Hr
Yellow
10.15kg
230mm
370mm
230mm
11kg
5