Intended Use; Safety Instructions; Technical Data - Flex M-DW Operating Instructions Manual

Screw magazine

Intended use

The screw magazine M-DW is designed for
the quick insertion of drilling screws,
chipboard screws and wood construction
screws. The screw magazine may be used
only in conjunction with the following dry wall
screwdrivers:
– DW 7-25/45/60
– ADW 18,0-42
Follow the operating instructions for the dry
wall screwdriver used!

Safety instructions

WARNING!
Read all safety instructions and other
instructions. Failure to observe the safety
instructions and other instructions may result
in an electric shock, fire and/or serious
injuries. Keep all safety instructions and
other instructions in a safe place for the
future.
 Pull the plug out of the socket and/or
remove the battery from the electric
power tool before making any
adjustments to the device or changing
accessories.
Some accidents are caused by electric
power tools starting unintentionally.
 Hold the electric power tool securely.
When tightening and loosening screws, high
reaction torques may occur briefly.
 Secure the workpiece.
A workpiece is held more securely in
a clamping device or vice than by hand.
 Wait until the electric power tool has
come to a standstill before putting it
down.
The insertion tool may jam and cause you to
lose control of the electric power tool.
 Wear suitable clothing. Do not wear any
loose clothing or jewellery. Keep hair,
clothing and gloves away from moving
parts.
Loose clothing, jewellery or long hair may
become caught in moving parts.
 Do not point the electric power tool at
yourself or at other people nearby.
4
 While working, do not reach into the
screw magazine or touch the area where
screws are being inserted.
There is a risk of injury from crushing or
sharp-edged screws.
 Use only suitable screw belts according
to the section "Technical Data".
If other screws are used, the screw
magazine may be damaged.

Technical Data

Length
Weight, without screw belt kg
Screws per belt (max.)
Screw size
– Length
– Max. shank diameter
– Max. head diameter
WARNING!
Before working on the screw magazine,
always pull out the mains plug or remove the
battery from the dry wall screwdriver.
Assembly
Follow the illustrated pages starting on
page 25 of these instructions.
Instructions for use
Follow the illustrated pages starting on
page 27 of these instructions.
Maintenance and care
CAUTION!
When cleaning with compressed air, always
wear goggles.
 Regularly blow out screw magazine with
dry compressed air.
Have repairs carried out only by a customer
service workshop authorised by the
manufacturer.
mm 250
0.55
50
mm 20–55
mm 4.2
mm 8.0