Drain Pump - Zanussi ZWF 1850 W User Information

Drain pump

The drain pump is maintenance-free. It is only neces-
sary to open the pump cover if there is a malfunction
and water is no longer being pumped out, e.g. if the
pump wheel is blocked.
Before loading the machine, please always ensure
that there are no foreign bodies present in the pock-
ets or in between the items to be washed. Paper
clips, nails, etc. which may find their way into the
washing machine along with the washing will remain
in the drain pump housing (foreign body trap that
protects the pump wheel).
1
Warning! Before opening the cover of the
drain pump, switch off the washing machine
and remove the power plug from the power
point.
1. First carry out an emergency drain.
2. Place a cloth on the floor in front of the cover of the
drain pump.
Residual water runs out.
3. Unscrew the pump cover in an anti-clockwise di-
rection and remove it.
4. Remove foreign bodies and fluff from the pump
housing and from the pump wheel.
5. Check whether the pump wheel right at the back of
the pump housing can turn. (If the wheel rotates
with a jerky motion, this is normal.) If the pumping
wheel cannot be turned, please contact your local
Service Force Centre.
6. Insert the pump cover. Insert the guides at the
sides of the cover into the guide slots and tighten
the cover by turning in a clockwise direction.
7. Close off the emergency drain hose and place it in
the retainer.
8. Close the plinth flap.
26