Advertisement
Quick Links
STEP BY STEP
INSTRUCTIONS
Your doctor has advised you to perform a NightOwl
if you suffer from sleep apnea. It measures signals from the tip of your finger with
a small light sensor that connects wirelessly with your smartphone throughout the
night. You NO- may be asked to sleep with this sensor for a more than one night.
Obtaining and setting up the test is very straightforward. Please follow the steps set
out below. Before your doctor can discuss the test results with you, you must return
the NightOwl
test kit following the instructions set out below.
®
Download the NightOwl
1.
On your smartphone, open the
App store app (iPhone) or the Play
Store app (Android).
Scan the code
123456789
4.
Follow one of these two options:
Scan the QR code above or enter the
code manually.
sleep test. This test will check
®
Companion app
®
2.
In the app you just opened, search
for and download the 'NightOwl
Companion' app.
5.
Fill in the requested information.
3.
Open the 'NightOwl
app. Press the button displaying
®
'I have an activation code' and give
permission to use the camera.
Companion'
®
Questions? Visit
ectosense.com/help
Advertisement
Related Manuals for Ectosense NIGHTOWL
Summary of Contents for Ectosense NIGHTOWL
- Page 1 STEP BY STEP INSTRUCTIONS Your doctor has advised you to perform a NightOwl sleep test. This test will check ® if you suffer from sleep apnea. It measures signals from the tip of your finger with a small light sensor that connects wirelessly with your smartphone throughout the night.
- Page 2 Start the NightOwl test ® Click the ‘set up my test’ button When you’re ready to go to bed, The test kit contains: a NightOwl and follow the simple instruction ® app on please open the NightOwl ® sensor, charger, plug, cable, and videos which the NightOwl ®...
Need help?
Do you have a question about the NIGHTOWL and is the answer not in the manual?
Questions and answers
Have tried three times but the red light will not blink let alone stay on
The red light on the Ectosense NightOwl stays on for 30 seconds because the sensor is in an error state. The recommended action is to reset the sensor.
This answer is automatically generated