installing the dishwasher
Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you're not at risk of injury when washing dishes.
STEP 1 CHECK THE PARTS AND TOOLS
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts required
Provided with the dishwasher. Check when you unbox the dishwasher in Step 5.
2 Installation Brackets
Kick Plate
Not provided
Power cable
Hot water supply line
Hose clamp
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some local codes
may require the cable to have a BX style metal jacket.
6_ installing the dishwasher
2 Flat Head Screws
(For the installation
bracket)
Protective sticker
Twist on wire
connector
3
8
/
90° Elbow(
")
Air gap
2 Screws
(for the side walls)
Strain relief
Tefl on
Tube fi ttings
Rubber connector
2 Screws
(for the kick plate)
Electrical tape &
Standard duct tape
®
tape or sealing
compound