Troubleshooting - HERKULES SE 3000 Original Operating Instructions

Power generator
Table of Contents

Advertisement

10. Troubleshooting

Fault
Engine does not
start
Generator has too
little or no
voltage
Anl_SE_3000_SPK7.indb 23
Anl_SE_3000_SPK7.indb 23
GB
Mögliche Ursache
Automatic oil cut-out has not respon-
ded
Spark plug fouled
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
- 23 -
Behebung
Check oil level, top up engine oil
Clean or replace spark plug (electro-
de spacing 0.6 mm)
Refuel / have the petrol cock checked
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
11.06.2018 09:05:08
11.06.2018 09:05:08

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents