Scope Of Delivery; Part Description - NX CEP00014 User Manual

WARNING. READ THE ENTIRE MANUAL BEFORE USING THIS PRODUCT
This model is a multistep car battery charger (called appliance in the following) for charging and
charge retention of 6V or 12V lead batteries (in the following called battery). These may be the types
AGM-Ca/Ca-GEL-MF-VRLA with electrolyte solution or gel. But also the Lithium Iron Phosphate
batteries (LiFePO4) 6.4V and 12.8V.

1. SCOPE OF DELIVERY

- 1 CHARGER
- 1 ANDERSON CONNECTOR
- 2 CLAMPS (1 red, 1 black)
- 1 USER GUIDE

2. PART DESCRIPTION

See figure A:
1. 12V 0.8A (Programme 2)
2. 12V 3.8A (Programme 3)
3. 12V 3.8A (Programme 4)
4. 6V 0.8A (Programme 1)
5. LED reverse connection
See figure B:
11. Charger
12. Anderson connector
13. Mains Lead
14. «+» pole clamp (Red)
13
2
6V/12V BATTERY CHARGER
Figure A:
10
Figure B:
11
6. LED stand by
7. Charge display
8. Condition display
9. Voltage display
10. Programme selection button (MODE)
2 4
1 3
5
6
9 7
8
15. «-» pole clamp (Black)
16. «-» pole connector cable (Black) inc. lug
17. «+» pole connector cable (Red) inc. lug
17
16
12
UK