Vansco Pro Series Manual page 2

Speed compensating, distance based electronic adhesive control system
Table of Contents

Advertisement

Specifications...
INPUTS
Outputs
DIMENSIONS:
PRO SERIES DIGI-TRACK
RESPONSE TIME:
TOTAL RESPONSE TIME
OUTPUT RESOLUTION:
PATTERN RESOLUTION:
MAXIMUM PATTERN
LENGTH:
MAXIMUM OFFSET:
STITCH ON/OFF LENGTH:
FLOW:
LOW SPEED CUT OFF
(LSCO):
ON-DELAY, OFF-DELAY:
(speed compensation)
V a n S c o P r o d u c t s - T h e G l u i n g E q u i p m e n t I n n o v a t o r s
2652 Lashbrook Avenue • South El Monte, CA 91733 • 626-448-7611 • Fax 626-448-0221
E-mail: sales@vansco.com • URL: www.vansco.com
Power: 115 VAC 50 or 60 Hz
Sensor: 12 VDC current sinking (open
DC Output: 24 VDC, 1.5 amp total
Power for Sensor(s): 12 VDC, 0.250 amp total
Enclosure: 8" wide x 10" high x 4" deep
Mounting Holes (4): 7" x 10.625," 0.025 dia
Weight: approximately 11 pounds
From TRIGGER SIGNAL to start of PATTERN
CYCLE: Less than 1 millisecond
PRO SERIES DIGI-TRACK response time plus
INPUT DEVICE response time
+/- 0.1 inch from programmed START and STOP
settings
0.1 inch
99.9 inches
99.9 inches
24.9 inches (maximum)
0-100 scale, no dimensions
0-250 ft/min, 1 ft/min resolution
0-50.00 ms, 0.25 ms resolution
collector)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digi-track

Table of Contents