Power Drawer Air Filter - Hitachi EC701HP Operation Manual

Section 6 - Preventive / Corrective Maintenance
E-Compact Transmitters

6.3.3 Power Drawer Air Filter

6.3.3.1 Replacement
Replacing the air filter is recommended only in the power drawers (MOD GV 40001) of the E-
Compact high-power transmitters.
For replacement, see the steps below.:
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Figure 3 - Fan with air filter
STEP 6
Manual Rev. 0.0 - June 2016
Remove the four screws from the front panel of the drawer.
Figure 2 - Front view - Power Drawer - MOD GV 40001
Detatch the front panel.
Disconnect and remove a first degree of protection from the air filter.
Remove the air filter.
Remove the last grid of the air filter.
1 ST
Protection
grid
Replace each fan air filter and reinstall it by reversing the order of steps above.
Figure 4 - Foam air filter
Air filter
Espuma
6-7