Operating Sequence; Washing 4.5 Kg Of Withe Cotton At 95°C; Load The Laundry; Measure Out The Detergent - Zanussi FJ 1094 G Instruction Booklet

Operating Sequence

Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.

1. Load the laundry

Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment .
If you wish to carry out the extra prewash, pour
detergent into the appropriate compartment marked .
P0223
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.
P0226

4. Select the required option

Depress QUICK WASH button, depending on the
selected programme and the degree of soil.
RINSE QUICK
ON-OFF
HOLD WASH
7